Two In One Closed Loop Stepper Drive Drive Nema17 Nema23 Easy Servo Motor

Item Details

Product Description

TS508-B is closed loop stepper drive,same technology,the only difference is that one drive can drive two easy servo motor separately and at same time.The advantage is to save space,save time to install,and save cost.Check its detail information as following:

TS508-B(2 AXIS IN 1 HYBRID SERVO DRIVE)

Specifications

?Advanced 64bit DSP dual core technology

?Two hybrid servo motors can be synchronous or separately controlled via RS485

?Auto recognized the property of hybrid servo motor after power up.

?Work smoothly, high torque output at medium/high speed; fast response ,and low heating ,low vibration.

? 0—10VDC analog input for speed mode,and support IO speed control function.(customized)

?Adopt advanced variable current and variable frequency technology, it can reduce motor and drive heating and vibration.

?The max pulse frequency is 500KHZ,(the default is 200KHZ)

?The two motors can be controlled by one pulse command or two separately channels pulse command.

?The voltage of input pulse is 4.5vdc—28vdc, no need connect any resistor

?Support RS232 for ProTurner by PC(special cable ,please contact ECON technology for this cable)
?Work smoothly, high torque output at medium/high speed; fast response ,and low heating ,low vibration.

Application:

It can be used in various kinds of machines, such as fast gate,laser cutters,laser markers, high precision X-Y tables,labeling machines ,medical equipment,3D printer ,electronicdevice ,packing ,robot and so on. Its unique features make the TS508-B an ideal solution for applications that require both low noise and high speed performances.

Drive feature and selection guide
Drive model	TS508-B
Voltage	24~50VDC
Max current output	8A
Vector over-load current	18A
weight	0.2kg
Matched closed loop stepper motor	TC42(TC42-03, TC42-04,TC42-06,TC42-08) TC57 series[TC57-10,TC57-22C,TC57-28,TC57-30BK] TC60 series [TC60-20,TC60-30,TC60-40] Default (TC28,TC35 or other manufacturer closed loop stepper motor)
Control technology	64bit floating-point dual-core DSP vector closed loop control
Pulse Frequency	Max 500KHZ,the default is 200KHZ
Protection	Over- voltage, under-voltage ,over-current, overload
Signal input	Pulse,direction,enable signal differential input, port electric level 4.5VDC—28VDC, no need to connect any resistor
Signal output	OC output, the max output current is 100MA, need to connect a pull-up resistor, Max pull-up voltage24VDC
Encoder feedback	AB encoder differential input, single-end can customized
Subdivision	Default 1600/rcv, DIP to set 200~51200
Open-close selection	MT1 and MT2 can set close loop or open loop, set by host computer
Using environment	-5?~55?
Common Customized Request	0~5V or 0~10V analog voltage speed function, Same or separate drive 2pc brush motor(A and B channel encoder, encoder signal differential or single-end is ok) One RS485 host line separately to control 2pcs stepper motor,2pcs hybrid servo mtor,2pcs brush motor

Function Description

The drive set micro-step, motor initial direction and other function setting by 8 DIP switches, details as following:

Pulse/REV Table

Pul/REV	SW1	SW2	SW3	SW4
Default	ON	ON	ON	ON
800	OFF	ON	ON	ON
1600	ON	OFF	ON	ON
3200	OFF	OFF	ON	ON
6400	ON	ON	OFF	ON
12800	OFF	ON	OFF	ON
25600	ON	OFF	OFF	ON
51200	OFF	OFF	OFF	ON
1000	ON	ON	ON	OFF
2000	OFF	ON	ON	OFF
4000	ON	OFF	ON	OFF
5000	OFF	OFF	ON	OFF
8000	ON	ON	OFF	OFF
10000	OFF	ON	OFF	OFF
20000	ON	OFF	OFF	OFF
40000	OFF	OFF	OFF	OFF